Bernina dcet 2500 - Manual (Page 54)


1999 BERNINA Of America
Section C - page 16
BLIND STITCH FOOT
LACE TO LACE
Feet-ures Unit ____pg._________
Instruction Manual for the Blind Stitch Attachment
Bernette
 Advanced Guide Workbook pg.____
Serger Library – Simply Serging
• Thread the serger for a 3-thread Overlock stitch using the Center Needle.
• Turn the Stitch Selection Dial to “A” on the Stitch Display Panel.
• Pull the Stitch Selection Lever/Rolled Hem towards you.
• Adjust the Stitch Length to 1.5.
• Loosen the Center Needle tension slightly.
• Attach the Blind Stitch Foot.
• Move the Fabric Guide just to the right of the Right Needle.
• Stiffen the lace with Spray Starch or a Fabric Stiffener.
• With right sides together place the header of the laces under the Presser
Foot and butted up against the Fabric Guide.
• Serge the laces together.
• Gently pull the lace flat and press.
• Trim and mount the sample.
FABRIC: 2 pieces of flat edging lace 6” long
NEEDLES: 70/10 Sharp or Microtex
THREAD: 3 cones of Isacord
PRESSER FOOT: Blind Stitch Foot