Bernina dcet 2500 - Manual (Page 12)


1999 BERNINA of America page 12
DIFFERENTIAL FEED
FABRICS THAT PUCKER
Instruction Manual pg.____
Bernette  Advanced Guide Workbook pg.____
Serger Library – Construction Basics
• Using a Fabric Marker, divide the fabric in half along the 6” edge.
• Turn the Stitch Selection Dial to “A” on the Stitch Selection Panel.
• Thread the serger for a 4-thread Overlock stitch.
• Adjust the Stitch Length to 2.5 (normal).
• Serge to the mark.
• Adjust the Differential Feed Dial to 0.7.
• Serge to the end of the fabric.
• Return the Differential Feed Dial to “N” (normal).
• Compare the two stitchings to see how the Differential Feed settings can
reduce fabric puckering.
• Trim and mount the sample.
FABRIC: Batiste 3” X 6”
NEEDLES: 80/12 Universal
THREAD: 4 cones of serger thread
PRESSER FOOT: Standard