Bernina dcet 2500 - Manual (Page 49)


1999 BERNINA Of America
Section C - page 11
3-THREAD NARROW SEAM
Instruction Manual pg._____
Bernette
 Advanced Guide Workbook pg.____
Serger Library – Tips and Tricks
• Following the diagrams on page ____ in the Instruction Manual, thread the
serger for a 3-thread Center Needle Overlock stitch.
• Turn the Stitch Selection Dial to “A” on the Stitch Display Panel.
• Adjust Cutting Width to 2 (normal).
• Adjust Stitch Length to 2.5 (normal).
• Pull the Stitch Selection Lever/Rolled Hem towards you to disengage the
Stitch Finger.
• Adjust the Differential Feed Dial between 0.7 and N.
• Fold the fabric in half to 2½” X 6”.
• Serge along the folded edge of the fabric. If necessary slightly tighten the
Looper Tensions (up) and re-stitch the seam.
• Return the Stitch Selection Lever/Rolled Hem to normal (push the
lever away from you).
• Return the Differential Feed Dial to “N” (normal).
• Trim and mount the sample.
FABRIC: Batiste 5” X 6”
NEEDLES: 80/12 Universal
THREAD: 3 cones of serger thread
PRESSER FOOT: Standard