Bernina dcet 2500 - Manual (Page 65)


1999 BERNINA Of America
Section D - page 5
2-THREAD FLATLOCK
Instruction Manual pg.___
Bernette
 Advanced Guide Workbook Supplement I pg.___
Feet-ures Unit ___pg.___
Serger Library – Tips and Tricks
Specialty Stitches
Simply Serging
• Attach the Upper Looper Converter.
• Turn the Stitch Selection Dial to “E”.
• Following the instructions on page ___ of the Instruction Manual thread the
serger for a 2-thread Flatlock Stitch using the Left Needle. Use Jeans Stitch 
in the Lower Looper.
• Adjust Stitch Length for 2.5.
• Attach the Right Hand Seam Guide and position the guide halfway between the
Left Needle and the Stitch Finger.
• Fold the fabric in half to 2” X 6”.
• Place the fabric under the Presser Foot and against the Right Hand Seam Guide.
• Serge along the fold. The Looper threads should loop off the edge of the fold.
• Pull the fabric flat. If the fabric doesn’t lay flat, move the guide closer to the
Left Needle and try again.
• Press, trim and mount the sample.
FABRIC: Medium weight cotton 4” X 6”
NEEDLES: 80/12 Universal
THREAD: 1 cone of serger thread (Needle)
1 cone Jeans Stitch
 (Lower Looper)
PRESSER FOOT: Standard