Toshiba Equium 8100 - Manual (Page 73)

Hardware for the Equium 8100M
4-14 Equium 8100D/M
Equium 8100D/M – 04chap.doc – ENGLISH – Printed on 23/sep/01 as 03_800UK
768 256 512 -
1280 256 512 512
512 512 - -
1024 512 512 -
1536 512 512 512
Installing a DIMM
The following procedure assumes you have opened the case and are
observing ESD precautions. (See Opening the case.)
1. Holding the DIMM only by the edges, remove it from its antistatic
package.
2. Make sure the retaining clips at either end of the socket are pushed
away from the socket.
3. Position the DIMM above the socket at about a 90-degree angle
relative to the motherboard.
Make sure the two small notches in the bottom edge of the DIMM
align with the keys in the socket.
4. Insert the bottom edge of the DIMM into the socket and make sure it
is seated correctly.
Inserting a DIMM
5. Gently push the top edge of the DIMM until the retaining clips at each
end of the socket snap into place.