Toshiba Equium 8100 - Manual (Page 54)

Hardware for the Equium 8100D
User's Manual 3-9
Version
1
Last Saved on 14/sep/01 5:29
Equium 8100D/M – 03CHAP.doc – ENGLISH – Printed on 23/sep/01 as 03_800UK
Motherboard
Locating the motherboard components
The following components are identified in the illustration:
1. Processor- Intel® Pentium® 4 processor; speed determined by your
build-to-order specification.
2. AGP expansion slot- One AGP slot provides a connection for a video
expansion card.
3. PCI expansion slots- Three PCI slots provide connections from the
motherboard to PCI expansion cards.
4. RTC (real-time clock) battery- Provides power to the real-time clock
and maintains CMOS settings when the computer is turned off.
5. Motherboard power connector- Provides the connection from the
power supply to the motherboard.
6. Floppy connector- For connecting floppy disk drives.
7. Memory slots- Three 168-pin DIMM sockets support system memory
from 128 MB to 1.5GB of SDRAM.
8. Secondary IDE connector- For connecting IDE devices such as
CD-ROM/DVD-ROM drives.
9. Primary IDE connector- For connecting IDE hard disk drives.
10. Front bezel lamps/buttons power connector- Provides power to the
front bezel lamps and buttons.