Burnham MPC - Manual (Page 5)

5
IMPORTANT INFORMATION -
READ AND sAvE ThEsE iNsTRUcTiONs fOR REfERENcE
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in death, serious
injury or substantial property damage.
CAUTION
Indicates a potentially hazardous situation which,
if not avoided, may result in moderate or minor
injury or property damage.
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death, serious injury
or substantial property damage.
NOTICE
Indicates special instructions on installation,
operation, or maintenance which are important
but not related to personal injury hazards.
NOTICE
This boiler has a limited warranty, a copy of which is printed on the back of this manual.
It is the responsibility of the installing contractor to see that all controls are correctly installed and are
operating properly when the installation is complete. The warranty for this boiler is valid only if the boiler has
been installed, maintained and operated in accordance with these instructions.
All boilers must be installed in accordance with National, state and Local Plumbing, heating and Elec-
trical codes and the regulations of the serving utilities. These codes and Regulations may differ from
this instruction manual. Authorities having jurisdiction should be consulted before installations are
made.
in all cases, reference should be made to the following standards:
UsA BOiLERs
A. current Edition of American National standard ANsi/NfPA 31, “installation of Oil Burning
Equipment”, for recommended installation practices.
B. current Edition of National fuel Gas code, NfPA 54/ANsi Z223.1.
c. current Edition of American National standard ANsi/NfPA 211, “chimneys, fireplaces, vents,
and solid fuel Burning Appliances”, for venting requirements.
D. current Edition of American society of Mechanical Engineers AsME csD-1, “controls and safety
Devices for Automatically fired Boilers”, for assembly and operations of controls and safety
devices.
E. All wiring on boilers installed in the UsA shall be made in accordance with the National Electrical
code and/or Local Regulations.
cANADiAN BOiLERs
A. current Edition of canadian standards Association csA B139, “installation code for Oil Burning
Equipment”, for recommended installation Practices.
B. The equipment shall be installed in accordance with the current installation code for Gas Burning
Appliances and Equipment, csA B149, and applicable Provincial Regulations for the class; which
should be carefully followed in all cases.
Authorities having jurisdiction should be consulted before installations are made.
c. All wiring on boilers installed in canada shall be made in accordance with the canadian Electrical
code and/or Local Regulations.