Konica Minolta bizhub 181 - Manual (Page 52)

Precaution 2
bizhub 181 2-11
Pr
ecau
tio
n
Chapter 2
2.3 Control panel parts and their functions
Names of control panel parts and their functions
1 2 3 4 6
7
8
9
21
20
19
5
10 18 11 12 13 14 15 16 17
No. Part name Description
1 [Power Save] key/in-
dicator Press to enter Power Save mode. (See p. 2-19.)
2 [Mixed Original] key/
indicator Press to select the “Mixed Original” setting.
3 Simplex/Duplex key/
indicator Selects double-sided copying. Select “1-SIDE →1-SIDE”, “1-
SIDE →2-SIDE”, “2-SIDE→1-SIDE” or “2-SIDE→2-SIDE”. If any
setting other than “1-SIDE →1-SIDE” is selected, the indicator
lights up.
4 Display Displays the number of copies, zoom ratio, setting menus and er-
ror messages.
5 [+], [,], [*] and [)]
keys
[OK] key Press the [+], [,], [*] and [)] keys to select menu items in the dis-
play and change their settings.
Press the [OK] key to apply the setting.
6 [Printer] key/indicator This indicator lights up while data is being printed from the com-
puter and flashes while data is being sent. For details, refer to the
User’s Guide for the printer driver.
7 [Access] key Press when account track settings have been applied. (See
p. 5-34.)
8 [Speed Dial] key Press to register frequently used addresses, and to recall them
during transmissions. (Available only if image controller IC-206 or
network interface card NC-503 is installed.)
9 [Phone Book] key Press to display the information programmed for speed dialing.
10 [Back] key Press to return to the previous screen.