Konica Minolta bizhub 181 - Manual (Page 232)

Utility mode/Copy mode parameters 6
bizhub 181 6-37
U
tility mode/Copy
mode parameters
Chap
te
r 6
Changing the administrator access code (“ADMINISTRATOR NO.” pa-
rameter)
1
Display the “ADMIN. MANAGEMENT” menu.
– Refer to “Displaying the “ADMIN. MANAGEMENT” menu” on
page 6-35.
2
Press the [+] or [,] key until “ADMINISTRATOR NO.” is selected, and
then press the [OK] key.
3
Use the keypad to type in the current administrator access code, and
then press the [OK] key.
– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.