Konica Minolta bizhub 181 User Manual
Page 218
Utility mode/Copy mode parameters
6
bizhub 181
6-23
U
tility mode/Copy
mode parameters
Chap
te
r 6
4
Press the [+] or [,] key until “AUTO”, “SIZE INPUT”, “MEMORY1” or
“MEMORY2” is selected, and then press the [OK] key.
–
By selecting “MEMORY1” or “MEMORY2”, a custom paper size
(“MEMORY1” or “MEMORY2”) registered from the “CUSTOM SIZE
MEMORY” menu can be selected. For details on registering custom
paper sizes, refer to “CUSTOM SIZE MEMORY” on page 6-27.
–
If “SIZE INPUT” was selected, use the keypad to type in the X and
Y measurements in the next screen that appears, and then press
the [OK] key.
–
To select the paper type, select “TRAY1 PAPER”, and then contin-
ue with step 5.
The “PAPER SOURCE SETUP” menu appears again.
5
Press the [+] or [,] key until “MEDIA TYPE” is selected, and then press
the [OK] key.