Konica Minolta bizhub 181 - Manual (Page 130)

Making copies 4
bizhub 181 4-37
Making
co
pies
Chapter 4
Copying onto label sheets
As an example, the following procedure describes how to make copies onto
7-7/8 inch (200 mm) × 9-13/16 inch (250 mm) label sheets loaded into the 1st
paper drawer.
1
Position the document to be copied.
– Refer to “Loading the document” on page 3-18.
2
Adjust the paper guides in the 1st paper drawer, and then load the label
sheets into the drawer.
– Load the label sheets
so that the side to be
printed on faces up,
as shown in the illus-
tration.