Konica Minolta bizhub 181 - Manual (Page 260)

Utility mode/Copy mode parameters 6
bizhub 181 6-65
U
tility mode/Copy
mode parameters
Chap
te
r 6
4
Use the keypad to type in width to be erased, and then press the [OK]
key.
– The width of the area to be erased can be set between 3/16 inch (5
mm) and 13/16 inch (20 mm).
– To correct the entered number, press the [Clear/Stop] key, and then
use the keypad to type in the correct number.
The “COPY SETTING 1” menu appears again.