Konica Minolta bizhub 181 User Manual
Konica Minolta Hardware
Table of contents
Document Outline
- Introduction
- 1 Installation and operation precautions
- 1.1 Safety information
- 1.2 Regulation Notices
- CE Marking (Declaration of conformity) for Users of the European Union (EU)
- For users in countries subject to class B regulations
- For users in countries not subject to class B regulations
- Laser safety
- Internal laser radiation
- CDRH regulation
- For European users
- For Denmark users
- For Finland, Sweden users
- For Norway users
- Laser safety label
- Ozone release
- Acoustic noise
- Notification for California Customers
- For EU member states only
- For EU member states Only
- 1.3 Installation precautions
- 1.4 Operation precautions
- 2 Precaution
- 3 Before making copies
- 4 Making copies
- 4.1 Copying
- 4.2 Stopping/restarting/canceling a copy job
- 4.3 Selecting the paper source
- 4.4 Making copies on manually fed paper
- Paper that can be fed manually
- Adjusting the multi bypass tray
- Loading plain paper into the bypass tray
- Loading overhead projector transparencies into the bypass tray
- Loading label sheets into the bypass tray
- Loading envelopes into the bypass tray
- Copying onto manually fed paper (manual bypass tray)
- Copying onto manually fed paper (multi bypass tray)
- 4.5 Copying onto various types of media
- 4.6 Specifying a Zoom setting
- 4.7 Selecting a Density setting
- 4.8 Interrupting a copy job
- 4.9 Checking machine counters
- 5 Advanced copy operations
- 5.1 Finishing settings (SORT/GROUP)
- 5.2 Making 2in1 or 4in1 copies
- 5.3 Making double-sided copies
- 5.4 Making copies using the “BOOK SEPARATION” function
- 5.5 Erasing sections of copies (“ERASE” function)
- 5.6 Negative/positive-reversed copying (“NEG. <-> POS.” function)
- 5.7 Making copies for filing (“PAGE MARGIN” Function)
- 5.8 Registering copy settings
- 5.9 Copying using an account number
- 6 Utility mode/Copy mode parameters
- 6.1 Utility mode
- 6.2 Utility mode/Copy mode parameters
- 6.3 MACHINE SETTING
- Displaying the “MACHINE SETTING” menu
- Changing settings for the auto panel reset operation (“AUTO PANEL RESET” parameter)
- Specifying energy-saving (Power Save mode) settings (“ENERGY SAVE MODE” parameter)
- Changing settings for the auto shut-off operation (“AUTO SHUT OFF” parameter)
- Changing the image quality level when the document feeder is used (“DENSITY (ADF)” parameter)
- Changing the image quality level when the original glass is used (“DENSITY (BOOK)” parameter)
- Changing the print density (“PRINT DENSITY” parameter)
- Changing the display contrast (“LCD CONTRAST” parameter)
- Changing the key repeating settings (“KEY SPEED SETTING” parameter)
- Changing the display language (“LANGUAGE” parameter)
- 6.4 PAPER SOURCE SETUP
- 6.5 CUSTOM SIZE MEMORY
- 6.6 USER MANAGEMENT
- 6.7 ADMIN. MANAGEMENT
- Displaying the “ADMIN. MANAGEMENT” menu
- Changing the administrator access code (“ADMINISTRATOR NO.” parameter)
- Enabling the “AUTO SHUT OFF” parameter to be set to “OFF” (“AUTO SHUT OFF” parameter)
- Enabling/disabling account number management
- Registering account numbers
- Changing/deleting account numbers
- Displaying/clearing total counters for each account
- Clearing all total counters
- 6.8 COPY SETTING 1
- Displaying the “COPY SETTING 1” menu
- Selecting the default paper drawer (“PAPER PRIORITY” parameter)
- Selecting the default image quality (“QUALITY PRIORITY” parameter)
- Selecting the default density (“DENSITY PRIORITY” parameter)
- Selecting the default “AUTO” density level (“DENSITY LEVEL (A)” parameter)
- Selecting the default “MANUAL” density level (“DENSITY LEVEL (M)” parameter)
- Selecting the book binding position (“BINDING POSITION” parameter)
- Adjusting the margin width (“MARGIN SETTING” parameter)
- Adjusting the width of the erased area (“ERASE SETTING” parameter)
- Selecting the setting for small-sized documents (“SMALL ORIGINAL” parameter)
- 6.9 COPY SETTING 2
- Displaying the “COPY SETTING 2” menu
- Selecting the default copy settings (“COPY PRIORITY” parameter)
- Selecting the default Finishing setting (“OUTPUT PRIORITY” parameter)
- Selecting the 4in1 page order (“4IN1 COPY ORDER” parameter)
- Selecting the default “MIXED ORIGINAL” setting (“MIXED ORIGINAL” parameter)
- Selecting the setting for double-sided copying (“DUPLEX COPY” parameter)
- Selecting the setting for crisscross feeding (“CRISSCROSS MODE” parameter)
- 7 When a message appears
- 8 Troubleshooting
- 9 Appendix
- 10 Index