Konica Minolta bizhub 181 User Manual
Page 231

6
Utility mode/Copy mode parameters
6-36
bizhub 181
U
tility mode/Copy
mode parameters
Chap
te
r 6
3
Use the keypad to type in the administrator access code, and then
press the [OK] key.
–
The default administrator access code is “000000”.
–
To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
The “ADMIN. MANAGEMENT” menu appears.
4
Press the [+] or [,] key until the desired ADMIN. MANAGEMENT pa-
rameter is selected, and then press the [OK] key.
–
[NETWORK SETTING], [E-MAIL SETTING 1], [E-MAIL SETTING 2]
and [USER SETTING] appear only when optional image controller
IC-206 or network interface card NC-503 is installed.
–
The following ADMIN. MANAGEMENT parameters are available.
ADMINISTRATOR NO.
AUTO SHUT OFF
ACCOUNT TRACK
NETWORK SETTING
E-MAIL SETTING 1
E-MAIL SETTING 2
USER SETTING