Konica Minolta bizhub 181 - Manual (Page 103)

4 Making copies
4-10 bizhub 181
Making
co
pies
Chapter 4
3
Press the [+] or [,] key until “AUTO” or “MANUAL” is selected.
– If “AUTO” was selected, press the [OK] key.
– If “MANUAL” was selected, press the [*] or [)] key until one of the
nine density levels is selected, and then press the [OK] key.
The main screen appears again.
4
If necessary, specify any other copy settings.
– Refer to “Before making copies” on page 3-2.
– Refer to “Advanced copy operations” on page 5-2.
5
Press the [Start] key.