Konica Minolta bizhub 181 - Manual (Page 141)

4 Making copies
4-48 bizhub 181
Making
co
pies
Chapter 4
5
Use the keypad to type in “200” for the length (X), and then press the
[OK] key.
– The paper length (X) can be set between 5-1/2 inch (140 mm) and
17 inch (432 mm).
– Refer to the diagram
at the right and be
sure to specify the
paper width and
length measure-
ments correctly.
6
Use the keypad to type in “150” for the width (Y), and then press the
[OK] key.
– The paper width (Y) can be set between 3-1/2 inch (90 mm) and 11-
3/4 inch (297 mm).
The BYPASS PAPER SETTING menu appears again.
length (X)
width (Y)