Konica Minolta bizhub 160 - Manual (Page 69)

3 Getting ready
3-38 SU-502
G
e
tt
ing
r
ead
y
Chap
ter
3
Specifying the settings for a speed dial number
This procedure cannot be used to register FTP server addresses. Register
FTP server addresses from PageScope Web Connection. (For details, refer
to “Specifying the setting for speed dialing (FTP server)” on page 3-51.)
1
Press the [Utility] key.
2
Press the , key until FAX REGIS-
TRATION appears.
3
Press the [2] key on the 10-key pad
to select
SPEED DIAL .
4
Use the 10-key pad to enter the 3-
digit speed dial number where you
wish to add an address. (Example:
011)
5
Enter the recipient name.
– For information on entering text,
refer to “Entering text characters”
on page 2-11.
– Up to 20 characters can be entered for the recipient name.
6
Press the [Yes] key.
7
Enter the e-mail address of the recip-
ient.
– For information on entering text,
refer to “Entering text characters”
on page 2-11.
– Up to 64 characters can be entered for the e-mail address.
– If only numbers are entered for the address, it will be regarded as a
fax number.