Konica Minolta bizhub 160 - Manual (Page 41)

3 Getting ready
3-10 SU-502
G
e
tt
ing
r
ead
y
Chap
ter
3
Setting the IP address
1
Press the [Utility] key.
The utility mode menu appears.
2
Press the + or , key until NET-
WORK SETTING appears.
3
Press the [1] key on the 10-key pad
to select
IP ADDRESS .
4
Press the * and ) keys to select
AUTO or SPECIFY , and then press
the [Yes] key.
– If AUTO is selected, the IP ad-
dress is automatically acquired from the DHCP server. The network
setting screen appears.
– If SPECIFY is selected, the screen for entering the IP address ap-
pears. (Go to step 5.)
? Is AUTO not available?
% AUTO is only available if there is a DHCP server on the network.
When AUTO is selected, there is no need to set the subnet mask or
gateway setting. If a fixed IP address is being used, “IP Address in
NVRAM” must be selected in PageScope Web Connection. Select
this option from the screen displayed after clicking [TCP/IP Config-
uration] in the menu on the “Network” tab.
5
Using the 10-key pad, enter the IP
address for the machine.
– The illustration at the right is an
example of an IP address. Con-
sult your network administrator for details about these settings.