Smtp & pop3 configuration, Smtp & pop3 configuration -29 – Konica Minolta bizhub 160 User Manual
Page 60
![background image](/manuals/474606/60/background.png)
Getting ready
3
SU-502
3-29
G
e
tt
ing
r
ead
y
Chap
ter
3
SMTP & POP3 configuration
SMTP configuration
Function
Description
SMTP server address
This function is used to specify the IP address or host name of an
SMTP server. (Up to 64 characters)
Default subject for e-mail
attachment
This function is used to specify the default subject line when
sending scan data as an e-mail attachment. (Up to 20 characters)
Sender name
This function is used to specify the sender’s name when sending
scan data as an e-mail attachment. (Up to 20 characters)
E-mail address
This function is used to specify the e-mail address of the sender.
Port number
This function is used to specify the port number for the SMTP
server. Normally, port number 25 is used. (1 to 65535)
SMTP server timeout
This function is used to specify the length of time (30 to 300 sec-
onds) until the connection to the SMTP server times out.