Konica Minolta bizhub 160 - Manual (Page 49)

3 Getting ready
3-18 SU-502
G
e
tt
ing
r
ead
y
Chap
ter
3
Registering the e-mail address of the sender
1
From the e-mail setting 1 menu in the
utility mode, press the [2] key on the
10-key pad to select
E-MAIL AD-
DRESS .
2
Enter the e-mail address of the ma-
chine.
– For information on entering text,
refer to “Entering text characters”
on page 2-11.
– Up to 64 characters can be entered for the sender address.
– Consult your network administrator for information about the e-mail
address to use.
– If you do not receive e-mail on the machine, enter the e-mail ad-
dress of the administrator.
3
Press the [Yes] key.
The e-mail setting 1 screen appears again.
Specifying the SMTP server address
1
From the e-mail setting 1 menu in the
utility mode, press the [3] key on the
10-key pad to select
SMTP SERV-
ER .
2
Enter the IP address or host name of
the SMTP server.
– For information on entering text,
refer to “Entering text characters”
on page 2-11.
– Up to 64 characters can be entered for the host name.
– The DNS settings must have been specified before the host name
for the SMTP server can be specified.
– The illustration at the right is an example of a host name. Consult
your network administrator for details about this setting.
3
Press the [Yes] key.
The e-mail setting 1 screen appears again.
[ ]
[ ]