Konica Minolta bizhub 160 - Manual (Page 45)

3 Getting ready
3-14 SU-502
G
e
tt
ing
r
ead
y
Chap
ter
3
Specifying the DNS configuration
1
From the network setting menu in the
utility mode, press the [4] key on the
10-key pad to select
DNS CONFIG. .
2
Press the * and ) keys to select
DISABLE or ENABLE , and then
press the [Yes] key.
– If DISABLE is selected, the net-
work setting screen appears.
– If ENABLE is selected, the screen for entering the IP address of the
DNS server appears. (Go to step 3.)
3
Using the 10-key pad, enter the IP
address for the DNS server.
4
Press the [Yes] key.
The network setting screen appears. To register settings in the ma-
chine, the machine must be turned off, then on again.
5
While the network setting screen is displayed, press the [No/C] key or
[Panel Reset] key so that the message
PLEASE RE-START POWER
SUPPLY OFF/ON appears.
6
Set the power switch for the machine to “o”, then “n” to restart the ma-
chine.