Konica Minolta bizhub 160 - Manual (Page 20)

Overview 2
SU-502 2-9
Ov
e
rv
ie
w
Ch
apte
r 2
16 9 6 12
10
7 13
11
14 17 19 15
18 20
8
No. Part Name Function
6 [Utility] key Used to display the different utility mode screens.
MACHINE SETTING, FAX REGISTRATION, E-MAIL SETTING 1,
E-MAIL SETTING 2, NETWORK SETTING, SCAN SETTING
7 [Status] key Used to check the status of a transmission.
8 “Error” indicator Lights up if an error has occurred.
9 Display Displays settings details, such as e-mail addresses, settings men-
us, and error messages.
10 * and ) keys
[Auto/Photo] key Used to specify the scanning mode when using the network scan-
ning functions. Used to select the item to the left or right of the
current position in settings screens.
11 + and , keys
[Zoom] key Used to select the item above or below the current position in set-
tings screens or lists.
12 [Yes] key Used to confirm settings.
13 [No/C] (clear) key Used to delete characters or numbers that have been entered in
a setting field. Used to return to the previous screen.
14 10-key pad Used to enter settings values. Used to enter numbers/characters.
E-mail addresses and other text can be entered with these keys.
Used to enter speed dial numbers.
15 [123/ABC] key Used to switch between number and character entry.
16 [Scan] key Used to switch between different scan modes. This key lights up
in green to indicate that the machine is in scan mode.
17 [Fax] key Used to send scan data or receive e-mail messages when using
the Internet fax function.
18 [Start] key Used to start scanning, or send e-mail messages/files.
19 [Stop] key Used to stop the scanning of documents, stop sending or receiv-
ing, or to stop printing.
20 [Panel Reset] key Used to cancel all current operations.