Konica Minolta bizhub 160 - Manual (Page 53)

3 Getting ready
3-22 SU-502
G
e
tt
ing
r
ead
y
Chap
ter
3
Specifying the POP3 server address
1
Press the [Utility] key.
The Utility mode menu appears.
2
Press the + or , key until E-MAIL
SETTING 2 appears.
3
Press the [1] key on the 10-key pad
to select
POP3 SERVER .
4
Enter the IP address or host name of
the POP3 server.
– For information on entering text,
refer to “Entering text characters”
on page 2-11.
– Up to 64 characters can be entered for the host name.
– The DNS settings must have been specified before the host name
for the POP3 server can be specified.
– The illustration at the right is an example of a host name. Consult
your network administrator for details about this setting.
5
Press the [Yes] key.
The e-mail setting 2 screen appears.
[ ]