Konica Minolta bizhub 160 - Manual (Page 43)

3 Getting ready
3-12 SU-502
G
e
tt
ing
r
ead
y
Chap
ter
3
Specifying the subnet mask
1
From the network setting menu in the
utility mode, press the [2] key on the
10-key pad to select
SUBNET
MASK .
2
Using the 10-key pad, enter the sub-
net mask value.
– The illustration at the right is an
example of a subnet mask ad-
dress. Consult your network administrator for details about these
settings.
3
Press the [Yes] key.
The network setting screen appears. To register settings in the ma-
chine, the machine must be turned off, then on again.
4
While the network setting screen is displayed, press the [No/C] key or
[Panel Reset] key so that the message
PLEASE RE-START POWER
SUPPLY OFF/ON appears.
5
Set the power switch of the machine to “o”, then “n” to restart the ma-
chine.