Konica Minolta bizhub 160 - Manual (Page 33)

3 Getting ready
3-2 SU-502
G
e
tt
ing
r
ead
y
Chap
ter
3
3 Getting ready
3.1 Connecting to a LAN network
This machine supports the TCP/IP protocol used by LAN networks. In order
to use this protocol, the machine must be connected to the LAN with a net-
work cable.
Connecting the LAN cable
Insert the connector on one end of the LAN cable into the network port
(marked LAN) on the back of the machine, and the connector on the other
end to an open port on a network hub.
2
Note
The network port is on the back of the machine.
Use a category 5 or 5E LAN cable.
The LAN cable is not included.
LED1
LED2