Konica Minolta bizhub 160 - Manual (Page 110)

Using scan to server (FTP) operations 5
SU-502 5-3
Us
in
g s
c
a
n
to
s
e
rv
e
r (
F
T
P
) o
per
at
ion
s
Cha
p
ter 5
5.1 Procedure for scanning to a server
5.1.1 Using the automatic document feeder
How to use the automatic document feeder
1
Press the [Scan] key.
The machine switches to scan mode,
and the scan screen appears.
2
Place the document to be scanned in
the automatic document feeder.
– Adjust the guides to the size of
the document.
– Load the document with the sur-
face to be scanned face up.
3
Press the [Speed Dial] key, and then
use the 10-key pad to enter the 3-
digit speed dial number programmed
with the FTP server address where
you want to upload the scan data.
– Specify a speed dial number be-
tween “201” and “210”.
– An FTP server address can only
be specified with a speed dial
number. In addition, the FTP
server addresses are registered
for a speed dial number using PageScope Web Connection. For
details, refer to “Specifying the setting for speed dialing (FTP serv-
er)” on page 3-51.
– If you make a mistake, press the [No/C] key, and then enter the cor-
rect number.