Konica Minolta bizhub 500 - Manual (Page 79)

2 Scanning Documents
2-44 bizhub 500/420
Scan
nin
g
Do
cu
men
ts
Chapter 2
The settings that can be specified are as follows:
Item Description Reference
File Type Selects the file type for saving the
scanned data. “File Type” on page 2-45
Resolution Selects the scan resolution. “Resolution” on page 2-48
Simplex/Duplex Selects whether to scan one side of
the document or both sides. “Simplex/Duplex” on page 2-49
Original Type Sets the image type of the scanned
document. “Original Type” on page 2-50
Scan Size Sets the paper size to be scanned. “Scan Size” on page 2-51
Zoom Sets the zoom ratio for scanning.
Frequently used zoom ratios can be
stored. “To specify the zoom ratio for
scanning (Zoom setting)” on
page 2-55
Density Specify the density for scanning. “Density” on page 2-57
Original Setting Specifies the type of document that
is loaded, for example, if it contains
mixed page sizes or is folded in a
zigzag. “Original Setting” on page 2-58
Application Provides functions for adjusting the
image to be scanned, for example,
for scanning books and for
scanning pages. “Book Scanning (Application)” on
page 2-60
“Booklet Pagination
(Application)” on page 2-63
“Annotations (Application)” on
page 2-65
“Frame Erase (Application)” on
page 2-67
“Center Erase (Application)” on
page 2-69
“Non-Image Area Erase
(Application)” on page 2-71
“Neg-/Pos. Reverse
(Application)” on page 2-72
Separate Scan The scan operation can be divided
into several sessions when all pages
of a document cannot be loaded
into the ADF or when placing the
document on the original glass. In
addition, the documents can be
scanned separately according to
their type, such as when single-
sided documents are mixed with
double-sided documents. “Separate Scan” on page 2-73
File Name Changes the name of the file to be
saved. “File Name” on page 2-75