Konica Minolta bizhub 500 - Manual (Page 232)

Specifying Settings From the Control Panel 3
bizhub 500/420 3-107
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
2
Note
To display the Administrator Setting screen, refer to “To display the Ad-
ministrator Setting screen” on page 3-8.
2
Note
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
Schedule Setting
You can specify the schedule for sending the total counter. An example for
specifying “Schedule1” is described below.
The settings that can be specified are described below.
When “Daily” is specified as the notification period
Item Description
Interval of Day(s) Enter the days each month for sending the schedule. To
change the value, press the [C] (clear) key, and then use the
keypad to type in the value (between 1 and 31).