Konica Minolta bizhub 500 - Manual (Page 179)

3 Specifying Settings From the Control Panel
3-54 bizhub 500/420
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3.13 NetWare Settings
The settings for using the machine on a NetWare network can be specified.
NetWare Parameters
The NetWare settings are as follows:
NetWare Setting screen 1/5
NetWare Setting screen 2/5
NetWare Setting screen 3/5
NetWare Setting screen 4/5
Item Description
IPX Setting Specify whether to use IPX.
Ethernet Frame Type Sets the frame type that is used for communications.
Authentication System When [ON (External Server)] was selected in “User
Authentication”, specify whether to allow NDS
authentication.
Item Description
NetWare Print Mode Select the print mode to be used.
Status The NetWare status can be verified. For details on specify-
ing the setting, refer to “Status” on page 3-58.
Item Description
Print Server Name Sets the print server name. Use the keyboard that appears
in the touch panel to type in the print server name (up to 63
characters).
Print Server Password Sets the password that is required when the print server
logs in to the file server. Use the keyboard that appears in
the touch panel to type in the password (up to 63
characters).
Polling Interval Sets the interval for searching the print queue. To change
the interval, press the [C] (clear) key, and then use the
keypad to type in the value (between 1 and 65535).
NDS/Bindery Setting If bindery is disabled, only NDS is enabled. If bindery is
enabled, both NDS and bindery are enabled.
Item Description
File Server Name Sets the file server name to which the print server logs in.
Use the keyboard that appears in the touch panel to type in
the server name (up to 47 characters).