Konica Minolta bizhub 500 - Manual (Page 371)

4 Specifying Settings Using PageScope Web Connection
4-100 bizhub 500/420
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
4.30 E-Mail Setting
E-Mail RX (POP)
You can specify the settings to perform the authentication of the e-mail
sender with POP Before SMTP.
Item Description
E-Mail RX Setting Specify whether to use the e-mail reception setting.
POP Server Address Enter the receiving POP server address (syntax: “***.***.***.***”
or FQDN where the input range of *** is 0 to 255). When
entering the host name, select the “Please check to enter host
name.” check box.
Login Name Enter the user name used to log on to the POP server (up to
63 characters).
Password Enter the password for logging on to the POP server (up to 15
alphanumeric characters).
APOP Authentication Enables/disables APOP authentication.
Connection Timeout Specify the connection timeout of the server (input range: 30
to 300 seconds).
Port No. Enter the server port number (input range: 1 to 65535).
Use SSL/TLS Port No. (SSL/
TLS) Select to use SSL/TLS. Also, enter the port number to be
used.