Konica Minolta bizhub 500 - Manual (Page 45)

2 Scanning Documents
2-10 bizhub 500/420
Scan
nin
g
Do
cu
men
ts
Chapter 2
3
Select the desired destinations, and then touch [OK].
4
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-43.
5
After specifying the settings, touch [OK].
6
Load the document into the ADF or position it on the original glass of
the machine.
7
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.