Konica Minolta bizhub 500 - Manual (Page 389)

4 Specifying Settings Using PageScope Web Connection
4-118 bizhub 500/420
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
4.34 TCP Socket Setting
You can specify TCP socket settings.
The settings that can be specified are described below.
2
Reminder
When changing the TCP socket settings, be sure to turn the power of this
machine off, then on again.
When turning the main power switch to “OFF”, then to “ON”, wait 10 sec-
onds or more before turning the switch to “ON” again; otherwise, this ma-
chine may not function normally.
The setting of [Use SSL/TLS] and [Port No. (SSL/TLS)] is available only
when the SSL/TLS setting is valid.
Setting the TCP Socket to [OFF] may result in the use of some applica-
tions on the computer unavailable.
Item Description
TCP Socket Specify whether to use a TCP socket.
Port No. Enter the port number (input range: 1 to 65535).
Use SSL/TLS Select to use SSL/TLS.
Port No. (SSL/TLS) Enter the port number for SSL/TLS (input range: 1 to 65535).
TCP Socket(ASCII Mode) Specify whether to use a TCP socket in the ASCII mode.
Port No. (ASCII Mode) Enter the port number (input range: 1 to 65535).