Konica Minolta Fujitsu Scanner - Manual (Page 70)

1-44
1.10 How to use the Scanner Driver
Detect Page Length
Scans the edge (bottom) of the documents and outputs data adjusted to the document
length. When any page shorter than specified "Paper Size" is included, the output size
is adjusted to the detected short size.
Enable Sleep Timer
This option specifies waiting time for turning off the lamps. The lamps will be turned off
when no operation is performed on the scanner for a certain period of time defined with
this option.
Double Feed Detection
Detects Double-feeds (phenomena that two or more sheets are accidentally fed). You
can set conditions for detecting Double-feeds so that the scanner will stop its operation
and display error messages. Double feeds are scanned by the differences in document
lengths or thicknesses.
Skew
With this option, you can set the scanner so that it will stop its operation and display
error messages when any skewed document is detected.
Pre-pick
With this option, you can enable or disable Pre-picking. Pre-picking is an operation that
feeds documetns into the ADF (to the scannning position) before starting actual
scanning operation.
Overscan
This option specifies the overscan function. This function makes the scanned images
larger than the original documents by adding margins.
[Side]
The settings of this configuration window are applied to the selected document side
(Both, Front, Back).