Konica Minolta Fujitsu Scanner - Manual (Page 303)

●AP-9
■ Error mesage (Temporary error
:Check LED blinking
)
Check LED blinks when the following errors occur except and .
The following messages are displayed if no documents are on
the hopper during the scanning opperation. Please place docu-
ments on the hopper. Scanning is continued, when you place
documents on the hopper for re-scanning.
To clear this message, press the button.
HINT
Check LED does not blink at Hopper empty error.
(at Double-feed)
HINT
"xxxx" shows the number of Batch counter value.
The following message displayed if a document is jammed in the
ADF.
Refer to "5.1 Clearing Document Jams" on page 5-2 for remov-
ing the document remained in the scanner.
HINT
One of "1" - "8" is displayed instead of "x", depending on paper jam status.
p e r E
x x x x
m p
x
P a t y
D u e l o b F e d e x x x x x
p e r E m p P a t y
p e r J a m P a x