Konica Minolta Fujitsu Scanner - Manual (Page 202)

7-2
7.1 Setup Mode
7.1 Setup Mode
■ Outline
There are two types of setup mode: Online setup mode and Offline setup mode.
From “Ready“ status, you can enter Online setup mode and you can enter offline setup mode from
offline status.
According to the selected mode, available functions are different.
To enter these modes, follow the instructions below:
- Online setup mode
When LCD indicates Ready status, press (Next button).
The following message appears.
By pressing (Enter button), the scanner enters Online setup mode.
- Offline setup mode
Press and hold (Start button) and turn on the power.
The Operator panel LCD displays the following message.
Press (Left arrow button) or (Right arrow button) and select [Setup].
Press (Enter button) to enter Offline setup mode.
To quit setup, press (Exit button).
HINT
The blinking item is the one selected.
S
M e o d e S l c
!
e t
t e u p M o d e
1
E D O S E L
E
< M C E
S E T T S U P
> T
T