Konica Minolta Fujitsu Scanner - Manual (Page 246)

7-46
7.3 Setup Mode Details
18. Setting Manual Feed mode
1) Press (Next button) or (Previous button) and let LCD display
.
2) At , if the setting change is required, press (Right arrow
button) and select [Yes].
Press (Enter button) to confirm the selection then the LCD display
changes to .
If the change is not necessary, select [No] and press (Enter button).
3) At , specify the time to start pick from the manual setting of the
document (Start time).
By pressing (Left arrow button), the pick start time decreases.
By pressing (Right arrow button), the pick start time increases.
The pick start time can be specified to be 0.2 to 29.8 seconds.
HINT
The blinking item is the one selected.
HINT
Pick start time can be specified by the unit of 0.2 second.
1 8 e M F u ! a e d n
g C n h a / Y e s N ? o e
a l
1 8 t 1 S i ! - a r P
1
= e c 0 S .
c k t