Konica Minolta Fujitsu Scanner - Manual (Page 285)

8-3
8.2 fi-486PRFR (Pre-imprinter)
8
OPTIONS
8.2 fi-486PRFR (Pre-imprinter)
The fi-486PRFR is installed at the front side of the document path, inside of the scanner. It prints
prior to scanning. The fi-486PRFR (Pre-imprinter) Specifications are described below.
As for the operations and functions of fi-486PRFR (Pre-imprinter), refer to the fi-486PRFR
Operator's Guide attached to fi-486PRFR.
Item Descriptions
Printing Method Thermal Ink Jet
Printable characters Alphabet letters : A to Z, a to z
Numeric characters: 0,1 to 9
Symbols : ! ” # $ % & ¥ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ { | }
Maximum printable
characters per line 40
Character size Height 2.91 mm (0.11 inch) x Width 2.82 mm (0.11 inch)
Character pitch Approximately 3.53 mm (8 characters/inch)
Printing area Printable area is shown as below.
A: 40 mm (1.7 inch) or more
B: 99 mm (3.9 inch) or less
C: 5 mm (0.2 inch) or more
D: 140.5 mm (5.5 inch) or less
(Max. 40 column)
E: 5 mm (0.2 inch) or more
Consumables Print Cartridge
E
C
B A
Ducument Reference Position
Center of document
Document f
eeding direction
Printing
Area (Front)
D