Konica Minolta Fujitsu Scanner - Manual (Page 15)

●xiii
Use this scanner only at the indicated power voltage. Do not connect
to multiple-power strips.
Wipe any dust from the power plug.
Do not install the device in locations subject to oil smoke, steam,
humidity, and dust.
Do not use the scanner if you smell a strange odor coming from the
scanner.
Use this scanner only at the indicated power voltage and current.
Improper power voltage and current might cause fire or electric shock.
Also, do not connect to multiple-power strips.
Wipe off any dust from metal parts on the power plug or metal fittings with
a soft, dry cloth. Accumulated dust might cause fire or electric shock.
Do not install the scanner in locations subject to oil smoke, steam,
humidity, and dust. Doing so might cause fire or electric shock.
If you detect heat coming from the device or detect other problems such
as smoke, strange smells or noises, immediately turn off the scanner and
disconnect its power plug.
Make sure that the smoking has stopped, and then contact the store
where you purchased the scanner or an authorized FUJITSU scanner
service provider.