Fujitsu isis scanner driver – Konica Minolta Fujitsu Scanner User Manual

Page 60

Text mode
Original mode

1-34

1.10 How to use the Scanner Driver

■ FUJITSU ISIS Scanner Driver

FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner
fi series by using application software that complies with the ISIS standard.

The following describes the procedure with examples of QuickScan

for ordinary scanning by

using this driver software.

The procedure may vary depending on your application. If you use an application other than
QuickScan

, please refer to its Guide or Help for further information.

● Procedure for Basic Scanning Operation

Startup the application.

From the [Start] menu, select [Programs]-[QuickScan] and click [QuickScan].

Select your scanner on the window below.

Select [Scan] - [Select Scanner] on the menu bar.

Select “Fujitsu fi-4860C”, then click the [OK] button.