Konica Minolta Fujitsu Scanner - Manual (Page 213)

7-13
7.2 Setup mode functions
7
OPERA
T
OR P
A
NEL MENUS
LCD
display
Descriptions Selectable
parameters
Default Mode Remarks
On-
line
Off-
line
B.Drop-out Specifies the back page
dropout color for a
monochrome scan. R
G
B G Avail-
able Avail-
able Settings via the
PC have the
priority.
Brightness Adjust the Front/Back
Brightness to compensate for
the grayscale level differences
between the CCDs. -6 to +6 0 Avail-
able Avail-
able
SCSI ID Specifies SCSI ID of the
scanner. 0 to 7 5 Not
Avail-
able Avail-
able New SCSI ID
valid after
power cycle.
Product ID Specifies the scanner product
ID. fi4860C /
fi4990C /
M4099D /
M3099G fi4860C Not
Avail-
able Avail-
able New setting
valid after
power cycle.
SCSI Bus Specifies the SCSI data bus
width, 8bit or 16 bit. 16bit/
8bit 16bit Not
Avail-
able Avail-
able New setting
valid after
power cycle.
Interface Specifies the interface to use
when an optional or third party
interface board is installed in
the TPS (Third Party Slot). Auto /
SCSI /
TPS Auto Not
Avail-
able Avail-
able