beautypg.com

Konica Minolta Fujitsu Scanner User Manual

Page 34

background image

1-8

1.3 Basic Operations of the Operator Panel

(2) In test mode ([Single feed] or [Multi-feed], the Hopper height changes as

follows by pressing

(Next button):

1.

When the Hopper is at the bottom position, it moves up to 250 sheet position.

2.

When the Hopper is at 250 sheet position, it moves down to the bottom
position.

3.

When the Hopper is at the highest position, it moves back to where it was when
the scan operation started.

ATTENTION

Pressing

(Previous button) does not change the position.

HINT

The Hopper is positioned at the bottom when the power is turned on.