Konica Minolta Fujitsu Scanner - Manual (Page 277)

7-77
7.5 Test Mode Details
7
OPERA
T
OR P
A
NEL MENUS
5) Specify the scanning conditions.
(1)At , select the left most item, [S] in the sample screen, and
press (Enter button). Then the LCD display shows
2.1>.
At this screen, press (Left arrow button) or (Right arrow button)
and select simplex or duplex.
Press (Enter button) and confirm the setting.
Then the display goes back to .
(2) At , select the second item from left, [A4P] in the sample
screen, and press (Enter button). Then the LCD display shows
.
At this screen, press (Left arrow button) or (Right arrow button)
and select the document size and the orientation. Following parameters
can be specified.
M
S
S I
M I
L E P X
P E L X / U P D L E X
A P 4
P P A E R Z E I S