Konica Minolta Fujitsu Scanner - Manual (Page 256)

7-56
7.3 Setup Mode Details
3) At , press (Left arrow button) or (Right arrow button) and
let your choice of number of digits blink.
Selectable number of digits is listed as below.
Press (Enter button), then is displayed.
4) At , specify the initial value of numbering.
By pressing (Left arrow button) or (Right arrow button), a digit position
(blinking on LCD) can be specified.
By pressing (Next button) or (Previous button), the number at the digit
can be changed.
After putting a initial value for the numbering counter, press (Enter
button) to confirm the initial number. Then, is displayed.
(1) [5] is blinking: 5 digit
(2) [8] is blinking: 8 digit
HINT
Initial number can be increased up to the maximum number
(5digit: 99,999 / 8digit: 16,777,215).
2 5 S C 2 ! t a
= 0 0
r t
0
- t o u n
0 0 0 0 0
2 5 - y 3 ! E m
= O n / O f
s p t R e e t
f