Konica Minolta Fujitsu Scanner - Manual (Page 172)

5-14
5.2 Troubleshooting
(* 1) If Binary mode is used, the scanned image of a photograph may not be good.
Depending on the applications used, the method to specify “Photo” mode and the
name of the mode can be different. If the application allows you to change the
setting from scanner driver setting dialog, specify [Halftone], [Gray scale] or [24bit
Color] for Image Mode. In [Halftone] mode, you have to specify Dither pattern.
(* 2) For the details of cleaning, refer to "3 DAILY CARE" on page 3-1.
(* 3) For the details on how to replace Lamps, refer to "4 REPLACEMENT OF
CONSUMABLES" on page 4-1.
Continued from the previous page
Contact an authorized FUJITSU
Scanner service provider.