Konica Minolta Fujitsu Scanner - Manual (Page 250)

7-50
7.3 Setup Mode Details
21. Setting SCSI bus width
1) Press (Next button) or (Previous button) and let LCD display
.
2) At . If Wide SCSI (68pin) interface is used, press (Right arrow
button) and select [16].
If SCSI-2 (50pin) interface is used, press (Left arrow button) and select [8].
3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
HINT
The blinking item is the one selected.
ATTENTION
If 16 bit bus width data transfer is prohibited, specify 8 bit.
2 1 C s S ! S I
= i d t W 8 / 1 h 6 b i t
B u