Konica Minolta Fujitsu Scanner - Manual (Page 267)

7-67
7.4 Test Mode Overview
7
OPERA
T
OR P
A
NEL MENUS
7.4 Test Mode Overview
■ Outline
Scanner operation can be checked in the offline test mode.
To enter the test mode, follow the procedures below.
- Test mode
Keep pressing (Start button) and turn on the power.
Then the Operator panel LCD displays the following message.
Press (Left arrow button) or (Right arrow button) and select [TEST].
By pressing (Enter button), the scanner enters test mode.
To end the test mode, turn off the power.
HINT
The blinking item is the one selected.
E D O S E L
E
< M C E
S E T T S U P
> T
T