AMX Signature Series NetLinx Integrated Controller NI-3101-SIG - Manual (Page 37)

Configuration and Firmware Update
27 NI-3101-SIG Signature Series NetLinx Integrated Controller
7. Click the New button to open the New TCP/IP Setting dialog box (FIG. 26), where you may enter both a
previously obtained DHCP or Static IP Address and an associated description for the connection into
their respective fields.
8. Place a checkmark within the Automatically Ping the Master Controller to ensure availability radio box
to make sure the Master is initially responding online before establishing full communication.
9. Click OK to close the current New TCP/IP Settings dialog box and return to the previous TCP/IP Settings
dialog box. Locate the new entry within the List of Addresses section.
10. Click the Select button to make the new entry the currently used IP Address communication parameter.
11. Click OK to return to the Communications Settings dialog and place a checkmark within the
Authentication Required
radio box if the Master has been previously secured with a username/password.
12. Press the User Name and Password button to open the Master Controller User Name and Password
dialog box (FIG. 27). Within this dialog, enter a previously configured username and password (with
sufficient rights) before attempting to connect to the Master.
FIG. 25 TCP/IP Settings dialog
FIG. 26 New TCP/IP Setting dialog
FIG. 27 Master Controller User Name and Password dialog box