AMX Signature Series NetLinx Integrated Controller NI-3101-SIG - Manual (Page 120)

NetLinx Security with a Terminal Connection
110 NI-3101-SIG Signature Series NetLinx Integrated Controller
Default Security Configuration
By default, the NetLinx Master will create the following accounts, access rights, directory associations, and
security options.
Account 1: User Name: administrator
Password: password
Group: administrator
Rights: All
Directory Association: /*
Account 2: User Name: NetLinx
Password: password
Group: none
Rights: FTP Access
Directory Association: none
Group 1: Group: administrator
Rights: All
Directory Association: /*
Security Options: FTP Security Enabled
Admin Change Password Security Enabled
All other options disabled
 The administrator user account cannot be deleted or modified with the exception of its password.
Only a user with "Change Admin Password Access" rights can change the administrator password.
 The NetLinx user account is created to be compatible with previous NetLinx Master firmware
versions.
 The administrator group account cannot be deleted or modified.
 The FTP Security and Admin Change Password Security are always enabled and cannot be
disabled.
Main Security Menu (Cont.)
Command Description
13) Make changes permanent by saving
to flash
When changes are made to the security settings of the
Master, they are initially only changed in RAM and are
not automatically saved permanently into flash. This
selection saved the current security settings into flash.
Also, if you attempt to exit the Main Security Menu and
the security settings have changed but not made perma-
nent, you will be prompted to save the settings at that
time.
14) Reset Database
(administrator only function)
These functions are only visible to administrators. If a
user has been given "administrator rights", this additional
menu option is displayed. This selection will reset the
security database to its Default Security Configuration
settings, erasing all users and groups that were added.
This is a permanent change and you will be asked to
verify this before the database is reset.
15) Display Database
(administrator only function)
These functions are only visible to administrators. If a
user has been given "administrator rights", this additional
menu option is displayed. This selection will display the
current security settings to the terminal (excluding user
passwords). It also displays all users (minus passwords),
their group assignment (if any) and their rights, as well
as all groups and their rights.