Edit group menu: list directory associations, Edit group menu: change access rights, Edit group menu: display access rights – AMX Signature Series NetLinx Integrated Controller NI-3101-SIG User Manual

Page 117: Option 8 - edit group

NetLinx Security with a Terminal Connection

107

NI-3101-SIG Signature Series NetLinx Integrated Controller

Edit Group menu: List directory associations

At the Edit Group prompt, type 3 to list all existing directory associations. A sample session response is:

The following directory associations are enrolled:

/directory1/*

/directory2/*

Press key to continue

Press to return to the Edit Group menu.

Edit Group menu: Change Access Rights

At the Edit Group prompt, type 4 to change the current access rights for the selected group account. A
sample session response is:

Select to change current access right

1) Terminal (RS232) Access................. Disabled

2) Admin Change Password Access............ Disabled

3) FTP Access.............................. Disabled

4) HTTP Access............................. Enabled

5) Telnet Access........................... Enabled

6) Configuration Access.................... Enabled

7) ICSP Access............................. Enabled

8) ICSP Encryption Required................ Enabled

Or to return to previous menu

Set Rights ->

Each selection simply toggles the security setting selected. is entered by itself to exit the menu
and return to the Main Security Menu.

Edit Group menu: Display Access Rights

At the Edit Group prompt, type 5 to view the current access rights for the selected group account. A
sample session response is:

Terminal (RS232)...................Disabled

Admin. Password Change.............Disabled

FTP................................Disabled

HTTP...............................Disabled

Telnet.............................Disabled

Configuration......................Disabled

ICSP...............................Disabled

Press key to continue

Press to return to the Edit Group menu.

Option 8 - Edit Group

Type 8 and at the Security Setup prompt (at the bottom of the Main Security Menu) to edit an
existing group account. A sample session response is:

Select from the following list:

1) administrator

2) Group 1

3) Group 2

Select group ->

Select a group from the list of currently enrolled groups and press to open the Edit Group Menu.
This is the same Edit Group Menu that was access via the Add Group option:

Changes made to the target Master from within the Terminal window are not reflected
within the web browser, until the Master is rebooted and the web browser connection
is refreshed.
Any changes made to the Master, from within the web browser are instantly reflected
within the Terminal session without the need to reboot.