Set up the logic analyzer – Agilent Technologies 01664-97005 User Manual
Page 68
3
Set up the oscilloscope.
Oscilloscope Setup
Time Base
Display
Delta V
Delta T
Time/Div: 1.00 ns/div
avg
V markers on
T markers on
# of avg: 16
marker 1 position: Chan 1
start on: Neg Edge 1
screen: dual
marker 2 position: Chan 1
stop on: Neg Edge 2
Channel
Channel 1
Channel 2
Display
on
on
Probe Atten
20.00
20.00
Offset
−1.3 V
−1.3 V
Volts/Div
400 mV
400 mV
Set up the logic analyzer
1
Set up the Configuration menu.
a
Press the Config key.
b
Assign all pods to Machine 1. To assign all pods, select the pod fields, then select
Machine 1.
c
Select the Type field in the Analyzer 1 box, then select State.
Testing Performance
To test the single-clock, multiple-edge, state acquisition
3–46